01
Design & Permitting
Device layouts, battery and voltage-drop calculations, and submittals to your AHJ.

Fire Alarm & Detection
Addressable panels, smoke and heat detection, notification, voice evacuation and emergency responder radio coverage, designed to NFPA 72 and serviced on your inspection calendar.
Overview
We design fire alarm systems around how your building is used: occupant load, sleeping areas, high ceilings, elevators and HVAC. From panel replacements to new installations, we handle drawings, permits, programming and acceptance testing.
Annual testing covers initiating devices, notification appliances and panel functions, with smoke detector sensitivity testing and battery checks on their own schedules.

Every device listed in your annual report.
What we do
01
Device layouts, battery and voltage-drop calculations, and submittals to your AHJ.
02
Upgrade obsolete panels while reusing compatible wiring and devices where possible.
03
Device-by-device testing coordinated with your monitoring company.
04
Speaker systems with live paging and pre-recorded messages.
05
Signal surveys, amplifier installs and annual testing for first-responder radio coverage.
06
Ground faults, trouble signals and nuisance alarms traced to the source.
Standards & frequency
We build these intervals into your service calendar, so tasks happen on time and records are ready when your fire marshal or insurer asks.
| Component | Task | Typical frequency |
|---|---|---|
| Initiating devices | Functional test (smoke, heat, pull stations) | Annually |
| Notification appliances | Functional test | Annually |
| Control panel & interfaces | Functional test | Annually |
| Batteries | Inspection and testing | Semiannually, by battery type |
| Smoke detector sensitivity | Sensitivity test | Within 1 year of install, then every other year |
| ERRCS | System test | Annually where required |
Summary of commonly adopted NFPA 72 editions. Adopted editions, local amendments and your AHJ determine actual requirements.
How it works
01
Existing conditions, occupancy and code review drive the layout.
02
Submittals, wiring and device installation by our alarm crews.
03
Panel programming, interfaces and full acceptance testing.
04
Staff orientation and annual testing on your calendar.
Questions
Have a question about your building? Call 218-262-9553 or send a request and a specialist will follow up.
Not always. Many upgrades replace the panel and reuse compatible wiring and devices. We survey the system and give you options, from a panel swap to a phased full replacement.
Common causes include ground faults, failing batteries, communication path problems and damaged devices. Our technicians trace the signal to its source and document the fix.
Many jurisdictions require ERRCS in new buildings, and sometimes after major renovations, when radio signal strength is inadequate. A signal survey shows whether your building needs it.
Testing involves alarms and strobes, so we schedule it to limit disruption, after hours if needed, and coordinate with your monitoring company so the test does not trigger a dispatch.
Our 24/7 line connects you with an on-call coordinator who can dispatch a technician, help you plan fire watch, and document the impairment for your records.
218-262-9553
Emergency service