Emergency Responder Radio hero

Emergency Responder Radio

Emergency Responder Radio Coverage (ERRCS / BDA)

Signal strength surveys, bi-directional amplifier and distributed antenna installs, licensing coordination and annual testing so firefighters can communicate inside your building.

IFC 510 & NFPA 1225Signal surveysAnnual testing

Overview

Radio coverage for the people who come to help

Concrete, steel, low-E glass and below-grade levels can block public safety radio signals. When firefighters can't talk to each other inside a building, they lose a critical tool.

Many jurisdictions now require new buildings, and some existing ones, to provide minimum radio signal strength throughout. We survey, design, install and test emergency responder radio coverage systems.

  • Pre- and post-construction signal surveys
  • Bi-directional amplifier (BDA) systems
  • Distributed antenna systems (DAS)
  • Annunciator and fire alarm supervision
  • Coordination with public safety agencies
  • Annual and five-year testing
Emergency Responder Radio overview
Signal surveys

Grid testing floor by floor.

What we do

ERRCS services

Get A Quote

01

Signal Surveys

Grid testing to show where coverage falls short.

02

System Design

Antenna layout, donor antenna and amplifier selection.

03

BDA Installation

Amplifiers, antennas, cabling and enclosures.

04

Supervision

Trouble and failure signals reported to your fire alarm.

05

Agency Coordination

Retransmission authorization and acceptance testing.

06

Annual Testing

Signal strength and system tests documented each year.

Standards & frequency

Typical ERRCS requirements

We build these intervals into your service calendar, so tasks happen on time and records are ready when your fire marshal or insurer asks.

ItemReferenceTypical requirement
CoverageIFC 510 / NFPA 1225Minimum signal strength in most of each floor; higher in critical areas
SurvivabilityIFC 510 / NFPA 1225Protected cabling and enclosures as required
Secondary powerIFC 510 / NFPA 1225Battery or generator backup for the required duration
TestingIFC 510 / NFPA 1225Annual testing; acceptance test at installation

Requirements depend on your jurisdiction's adopted code and local public safety agency.

How it works

A clear process from first call to closeout

01

Survey

Measure existing signal throughout the building.

02

Design

Antenna and amplifier design for your structure.

03

Install

Install, coordinate with the agency and test.

04

Maintain

Annual tests and supervised monitoring.

Questions

Emergency Responder Radio FAQs

Have a question about your building? Call 218-262-9553 or send a request and a specialist will follow up.

How do we know if we need ERRCS?

Your fire marshal will tell you if it is required, usually at plan review or final inspection. A signal survey shows whether existing coverage meets the standard.

Can the survey be done before construction finishes?

Yes. A preliminary survey can be done once the building is enclosed, with a final survey before occupancy.

Does ERRCS improve cell phone coverage?

No. ERRCS carries public safety radio frequencies only. Cellular coverage needs a separate system.

Who maintains the system?

The building owner. We provide annual testing and repairs.

Related services

Often paired with this service

All services
Fire Alarm & Detection

Fire Alarm & Detection

Panels, detection, notification and voice evacuation.

Learn more
Mass Notification & Voice Evac

Mass Notification & Voice Evac

Voice evacuation, paging and outdoor warning.

Learn more
Alarm Monitoring

Alarm Monitoring

Central station monitoring over cellular and IP paths.

Learn more

System impairment, leak or alarm trouble?

Our 24/7 line connects you with an on-call coordinator who can dispatch a technician, help you plan fire watch, and document the impairment for your records.

218-262-9553

Emergency service