01
Know what you have
Start with an inventory: sprinkler risers and system types, fire pumps, standpipes, backflow assemblies, fire alarm panels, kitchen and special hazard systems, extinguishers, emergency lights, fire doors and dampers. Your first inspection with a new contractor should produce this list.
02
Know who is responsible
Fire codes and NFPA standards make the building owner, or the owner's designated representative, responsible for inspection, testing and maintenance. Leases may assign some tasks to tenants. Write down who owns which system so nothing falls through the cracks.
03
Build one calendar
Each system has its own intervals: weekly and monthly checks, quarterly and semiannual visits, annual tests and multi-year tasks. Put them on a single calendar and decide which tasks your staff will do and which your contractor will do.
04
Handle impairments properly
When a system is out of service, follow an impairment procedure: tag the system, notify the fire department, monitoring company and insurer as required, and plan a fire watch if your fire marshal requires it. Restore protection as quickly as possible and record what happened.
05
Act on deficiencies
Every report will list deficiencies. Prioritize impairments and critical items, budget for the rest and keep a record of when each was corrected. Unresolved deficiencies are a common finding in fire marshal and insurance inspections.
06
Keep records
Keep inspection reports, test results, repair records and acceptance documents for at least as long as your code and insurer require. A customer portal makes them easy to share during inspections.
07
Prepare for Minnesota winters
Before the first hard freeze, check heat in riser rooms, attics and vestibules, drain dry system low points and confirm compressors are working. Freeze breaks are the most common cause of emergency calls in our region.
08
Work with your contractor
Give your contractor access, past reports and a single point of contact. Ask for clear quotes, scheduled reminders and records you can read. Review the program at least once a year.
Important: this guide is a general overview. Your adopted codes, local amendments, insurer requirements and authority having jurisdiction determine the actual requirements for your building.