01
Communicator Upgrades
Replace dialers on copper lines with cellular or IP communicators compatible with your panel.

Alarm Monitoring
Central station monitoring through cellular and IP communicators, with an upgrade path for buildings still relying on traditional phone lines.
Overview
Monitoring sends alarm, supervisory and trouble signals from your fire alarm panel to a central station that notifies the fire department and your contacts. The communication path matters as much as the panel.
As carriers retire copper phone service, many buildings are moving their communicators to cellular or IP. We assess your panel, install a compatible communicator and handle the account transfer.

Planned before the copper line is cut.
What we do
01
Replace dialers on copper lines with cellular or IP communicators compatible with your panel.
02
Around-the-clock monitoring with dispatch to your local fire department.
03
Contacts and escalation order kept current as your staff changes.
04
Switching providers? We transfer the account and test every signal path.
05
Verification that every alarm, supervisory and trouble signal arrives correctly.
06
Alarm and trouble history for insurers, audits and post-incident reviews.
Standards & frequency
We build these intervals into your service calendar, so tasks happen on time and records are ready when your fire marshal or insurer asks.
| Signal | Typical response | Examples |
|---|---|---|
| Alarm | Fire department dispatched, then building contacts | Smoke detector, waterflow switch, pull station |
| Supervisory | Building contacts notified | Valve tamper, low air on a dry system, fire pump running |
| Trouble | Building contacts and service notified | AC power loss, ground fault, communication failure |
Response procedures follow your account setup, NFPA 72 and local dispatch requirements.
How it works
01
We confirm panel compatibility and your current communication path.
02
Cellular or IP communicator installed and programmed.
03
Contacts loaded and every signal type tested end to end.
04
Around-the-clock monitoring with annual signal verification.
Questions
Have a question about your building? Call 218-262-9553 or send a request and a specialist will follow up.
Contact us before the line is disconnected. We confirm whether your panel can accept a cellular or IP communicator, install it, transfer monitoring and test every signal so there is no gap in coverage.
Current NFPA 72 editions recognize cellular and IP communication paths, and many jurisdictions accept a supervised cellular communicator. Requirements depend on your adopted code edition and your AHJ, which we confirm before installation.
For fire alarms, the central station dispatches the fire department first and then calls your contact list. Supervisory and trouble signals go to your contacts and to us for service.
Usually, yes. We review your contract terms and panel programming, then schedule a cutover and test.
Our 24/7 line connects you with an on-call coordinator who can dispatch a technician, help you plan fire watch, and document the impairment for your records.
218-262-9553
Emergency service